Houston Handyman Expert
Carpentry Services in Houston, TX
Done Right Houston provides professional carpentry services and carpentry repairs for homeowners throughout Houston, TX. Our team handles finish carpentry, damaged wood trim, baseboard and crown molding installation, door and window casing, shelving, wainscoting, and built-in woodwork.
Whether you need a carpenter for a small repair, restoration of existing woodwork, or a new interior installation, we assess the project, explain the options, and complete the work with attention to the fit and finished appearance.
With 25 years of Houston construction experience and finish carpentry work on more than 400 homes, Done Right Houston brings practical knowledge of residential construction and detailed woodwork to your project.
Get Your Free Quote
Fill out the form below and we’ll contact you within 24 hours to confirm.
- No obligation. 100% Free Estimate.
WHAT WE HANDLE
Carpentry Services Work Done Right Houston Handles
Baseboard Repair and Installation
Baseboards take more abuse than any other piece of trim in a Houston home. Furniture impact, vacuum cleaners, settling foundations, and humidity cycling all pull baseboards away from the wall over time. We re-secure baseboards that have separated, replace damaged sections, fill stripped nail holes properly, and install new baseboards in rooms where you are upgrading from builder-grade or removing carpet.
Crown Molding Installation and Repair
Crown molding adds a finished look to a room but only when the miters are cut clean and the joints are tight. We install crown molding in single rooms or throughout a home, repair cracked or separated miters at corners, and replace damaged sections cleanly. Cope joints on inside corners and proper scarf joints on long runs are standard for our team. No caulk-and-pray shortcuts.
Mantel Installation and Repair
Fireplace mantels in living rooms and primary bedrooms. We install new mantels on existing fireplace surrounds, repair damaged mantels, and re-secure mantels that have come loose from the wall. Wood mantels, reclaimed beam mantels, and traditional carved mantels.
Wainscoting Repair and Installation
Wainscoting damaged by impact, water, or settling needs careful repair to match the surrounding panels. We repair damaged sections, replace panels where the damage is too far gone, and install new wainscoting in dining rooms, hallways, and stairwells. Beadboard, raised-panel, and flat-panel wainscoting are all in scope. Caulk lines stay tight and paint-ready.
Chair Rail and Picture Rail Installation
Chair rail in dining rooms and along stairwells, and picture rail in older Heights and Montrose homes that still have it or want it added. We level, miter clean corners, and run continuous lengths on long walls.
Shelving and Closet Shelving
Bracket shelves, floating shelves, closet shelving systems, pantry shelves, and laundry room shelves. We install shelves at the height you want, level, and anchored to studs or with the appropriate wall anchors for the weight load. For sagging shelves that need re-securing or adjustment, we re-anchor and brace as needed.
Deck and Patio Construction
New deck builds, raised decks with stairs and railings, composite decking, ground-level patios, and outdoor living spaces. We handle site preparation, framing, installation, and finishing to create a durable space built around how you use your yard.
Siding Installation and Repair
Cracked, loose, warped, or aging siding panels, along with full siding replacement for homes needing an exterior refresh. We repair damaged sections, replace missing panels, and install new siding with proper alignment, trim, corner posts, and flashing.
Other Carpentry Repair and Installation Services in Houston
We are Professional Handyman Contracter and we provides residential carpentry repair, finish carpentry, and installation services for homeowners throughout Houston, TX. Whether you need damaged interior woodwork repaired, door and window casing replaced, shelving installed, or custom storage built, our team handles projects with attention to measurements, materials, secure installation, and finished appearance.
With 25 years of Houston construction experience and finish carpentry work on more than 400 homes, we understand the details involved in repairing existing woodwork and completing new installations. From a small carpentry repair to a larger home improvement project, we assess the work and explain the options before getting started.
Carpentry Repair and Woodwork Restoration
Woodwork can develop cracks, loose joints, surface damage, and weakened connections after years of use. Changes in indoor humidity, normal building movement, and everyday impact can also affect the condition of existing carpentry.
Done Right Houston provides carpentry repair and restoration services for damaged interior woodwork throughout Houston. We assess the condition of the material and determine whether the affected section can be repaired, reinforced, or needs replacement.
Our work includes repairing separated wood joints, securing loose components, replacing damaged wood sections, and addressing minor deterioration where the surrounding material remains sound. We consider the existing wood type, dimensions, and finish so the repaired area blends with the original installation as closely as practical.
Older Houston homes may have original woodwork or details that are difficult to match with standard replacement materials. Where appropriate, we focus on preserving usable components and replacing only the sections that cannot be repaired effectively.
For homeowners searching for a carpenter to repair existing woodwork, our team can assess the damage and recommend a practical solution based on the condition of the material.
Window Seat and Bench Construction
Window seats and built-in benches can provide seating and storage while making use of spaces that might otherwise remain unused.
Done Right Houston handles suitable residential window seat and bench construction projects, including bay-window seating, entryway benches, breakfast nook benches, and mudroom seating.
The work begins with reviewing the available space, desired dimensions, intended use, and surrounding room layout. Depending on the design, the project may involve framing, support installation, panel fitting, trim work, and preparation for the final finish.
For benches with storage, we consider access to compartments, lid or door movement, and how the structure will be used.
Window seats must also account for nearby windows, existing walls, and any heating or ventilation features that could be affected by the installation.
If you want a custom bench built for an existing space, send us reference photos and approximate measurements so we can discuss the project requirements.
Stair Tread and Riser Repair
Stair treads and risers experience regular foot traffic and may become loose, damaged, or noisy over time. Worn stair nosing, separated components, and squeaking can affect the comfort and safety of an existing staircase.
Done Right Houston handles suitable localized stair tread and riser repairs for residential interiors.
We inspect the affected components to determine whether the issue involves loose fasteners, damaged material, worn connections, or a condition requiring more extensive evaluation.
Depending on the project, repairs may include securing an existing tread, replacing a damaged riser, addressing loose nosing, or correcting a localized problem with an accessible connection.
Because stairs are safety-related structures, the existing framing and support must be suitable for the proposed repair. Significant structural damage, major movement, or noncompliant stair dimensions may require a more extensive assessment.
We focus on appropriate repairs to existing components rather than representing a localized carpentry repair as a complete staircase reconstruction.
Handrail and Stair Rail Repair
Loose or damaged handrails can make stairways difficult and unsafe to use. Common problems include weakened mounting brackets, loose connections, damaged rail components, and inadequate attachment to the supporting structure.
Done Right Houston provides suitable residential handrail and stair rail repairs, depending on the condition and scope of the work.
We assess the existing handrail, mounting hardware, wall support, and damaged components to determine whether the system can be securely repaired or requires replacement.
For localized repairs, work may include replacing worn brackets, reinforcing suitable mounting points, securing loose connections, or replacing a damaged rail section.
Handrails are functional safety components, so secure attachment, appropriate dimensions, and applicable building requirements are important considerations. If the existing system has significant structural deficiencies, we explain when additional corrective work or a qualified specialist may be needed.
Small-Job Carpentry and Handyman Repairs
Not every home carpentry project requires a major renovation or an extensive construction crew. Many homeowners need help with a single damaged wood component, an unstable shelf, a loose door frame, or another small repair that requires the right tools and experience.
Done Right Houston provides small-job carpentry services for homeowners throughout Houston, including minor interior woodwork repairs, shelving adjustments, damaged casing replacement, loose built-in components, and other suitable residential carpentry tasks.
We review the condition of the existing materials and determine whether the work can be handled as a localized repair or requires replacement.
Homeowners with several small carpentry projects can discuss them together when requesting an estimate. This can make it easier to plan related work during the same appointment when scheduling and project scope allow.
For other household repairs and installations, explore our handyman services in Houston.
Common Carpentry Problems We Fix
Trim Separating from Walls
Baseboards, crown molding, and casing pulling away from the wall at the back edge. Houston foundation movement is the usual cause. We re-secure with the right fasteners and address the gap properly so it does not reopen the next season.
Cracked Miters at Corners
Outside and inside corner miters that have opened up over the years. We re-cut, glue, and re-set the miter joint so it stays closed.
Stripped Nail Holes in Trim
Old nail holes that no longer hold a finish nail because the wood has split or the hole has been hit too many times. We fill, plug, or relocate the fastener so the trim sits tight.
Damaged Trim Sections
Trim that has been hit, dented, chipped, or split. We replace the damaged section with matching profile and refinish so the repair blends.
Sagging Shelves
Bracket shelves that have bowed under load, floating shelves that have pulled from the wall, and built-in shelves that have sagged in the middle. We re-anchor, add support, or replace the shelf with a stiffer build.
Loose Built-Ins
Bookcases and built-ins that have separated from the wall or are leaning. We re-anchor to studs or backing so the unit is solid again.
Wainscoting Joint Failure
Wainscoting panels separating at the seams or at the chair-rail cap. We re-seat panels, re-caulk seams, and refinish.
Squeaky Stairs
Treads that squeak when you walk on them. We refasten the treads to the stringers from below where possible, or from above with finish fasteners that disappear.
WHAT WE HANDLE
Why Houston Homes Need Carpentry Repair More Than Most
Houston’s climate and soil work against your interior trim every year. Foundation movement, humidity, and years of settling can lead to separated baseboards, cracked molding joints, loose built-ins, and other finish carpentry problems. These are common issues we handle as part of our handyman services in River Oaks, especially in established homes where matching existing trim and architectural details matters.
Foundation movement: Houston’s clay soil expands and contracts with moisture. As the foundation shifts, trim and molding separate at joints, miters open at corners, and baseboards pull away from walls. Older homes in Houston Heights are especially common examples where our handyman team handles finish carpentry repairs, including trim, molding, baseboards, and other interior woodwork issues.
Humidity cycling: High summer humidity and air-conditioned interiors cause wood trim to expand and contract through the year. Caulk lines fail, joints loosen, and previously installed trim opens up at seams.
When you book a carpentry repair with us, we look at the cause as well as the symptom. If the same joint keeps opening at a corner, the right fix is different from a quick caulk-and-paint. We use the right approach so the repair holds.
What's Included in Every Installation
Assessment of the existing trim, shelf, or carpentry feature and what is driving the issue
Removal of damaged sections where replacement is needed
Material and stain matching to existing trim where possible
Clean miter cuts, cope joints, and proper joinery
Nail hole filling, sanding, and caulking ready for paint
Final fit and finish check before we leave
Cleanup of cuttings, sawdust, and packaging
What to Have Ready Before We Arrive
A clear idea of what you want done. A photo or two when you book helps us scope it accurately.
For installations, the trim, shelving, or wainscoting materials on site. We work with what you supply.
Furniture moved away from the work area when possible.
Paint or stain on hand if you want us to caulk and prep for paint match. We also handle interior painting as a separate service.
How Much Does Carpentry Work Cost in Houston?
Carpentry job cost in Houston depends on the type of work, the linear footage involved, the material, and whether we are repairing or installing fresh. We give you a clear price before starting. Many Montrose homes feature original wood details and unique layouts that require careful repair work. Done Right Houston provides Montrose handyman services for homeowners needing carpentry repairs, installations, and maintenance.
What affects the cost:
Linear footage. Small repairs at one corner take less time than a full room of new crown molding.
Material. Standard MDF trim cuts and installs faster than hardwood or detailed profile molding.
Repair complexity. Foundation-related separation that needs proper joinery is more involved than a single nail-pop repair.
Combined jobs. Booking multiple carpentry items in one visit reduces the per-job cost.
Fill out the estimate form with a description of the work and a photo if you have one. We will get back to you within 24 hours with a clear price. We provide carpentry and repair solutions as part of our Bellaire handyman services.
SERVICE AREAS
Serving Houston and Surrounding Neighborhoods
Carpentry Service FAQs
Who provides carpentry services in Houston, TX?
Done Right Houston provides residential carpentry services throughout Houston, including finish carpentry, wood trim repairs, baseboard installation, crown molding, shelving, wainscoting, built-ins, and other home carpentry projects. Our team has 25 years of construction experience and offers free estimates for suitable repairs and installations.
Can a handyman install crown molding?
Yes. Crown molding installation is one of the most common carpentry jobs handymen handle. We cut clean miters and cope joints on inside corners, scarf-joint long runs, and finish caulk and nail-hole fill ready for paint.
Why do my baseboards keep pulling away from the wall?
In Houston, the most common cause is foundation movement. Clay soil expansion and contraction shifts wall framing slightly, which pulls baseboards away over time. The fix depends on how active the movement is and where the gap is opening. We assess the cause when we arrive and use the right repair approach so it holds longer than a quick caulk job.
What is the difference between cope joints and miter joints on crown molding?
A miter joint cuts both pieces at 45 degrees and joins them at the corner. It looks clean on the day it goes up but opens slightly the first time the house moves or the wood expands. A cope joint cuts one piece square against the wall and shapes the second piece to fit the profile of the first. The cope joint holds tight even when the corner moves slightly, which is why we use cope joints on inside corners. This is the difference between a crown molding job that looks tight for 20 years and one that opens up after the first summer.
Do you supply the trim and molding?
You source the materials and we install. This keeps the cost down and lets you choose the exact profile and material. We work with any trim from Home Depot, Lowes, or a local lumberyard. Let us know what you have when you book.
Can you match my existing baseboard or crown molding?
In most cases yes, if the profile is still commercially available. Older custom profiles in 100-year-old Heights homes occasionally are not. If we cannot source an exact match, we will discuss alternatives with you before starting so you can decide how you want to handle it.
How long does a carpentry repair take?
A baseboard re-secure in one room takes 30 to 60 minutes. A full room of crown molding installation takes 3 to 5 hours depending on room size and ceiling complexity. Built-in bookcases and mantel installations are typically half-day to full-day jobs. We give you a realistic time estimate when you book.
Do you install shelving in closets, pantries, and garages?
Yes. Closet shelving, pantry shelving, garage shelving, and laundry room shelves are all in scope. We anchor to studs or use rated wall anchors based on the load, and confirm level and secure before leaving.
Can you repair wainscoting damaged by water?
Yes. If the damage is localized to a few panels, we replace those panels and refinish the area. If we see signs that water is still active, we will identify the source first so the repair holds.
Do you build custom built-ins, mantels, and benches?
Yes. Built-in bookcases, library walls, window seats, mudroom benches, breakfast benches, and fireplace mantels are all in scope. Tell us what you have in mind when you book and we will walk through dimensions, materials, and timing with you.
What kind of wood and material do you work with?
Pine, oak, poplar, MDF, primed finger-jointed trim, hardwoods, and reclaimed wood. The choice depends on what you want, your budget, and whether the piece will be painted or stained. We can advise on the right material for the job when you book.
How much does carpentry work cost in Houston?
Cost depends on the scope and material. A baseboard repair in one room is fast. A full crown molding install or a built-in bookcase takes most of a day or longer. Fill out the estimate form with a description and a photo and we will respond within 24 hours with a clear price.
Can I hire a carpenter for a small job?
Yes. Done Right Houston handles small carpentry projects, including loose baseboards, damaged trim, cracked molding joints, shelf repairs, door casing repairs, and other localized woodwork problems. Send us photos and a description of the work so we can review the project and provide an estimate.
What carpentry repair services do you provide?
Our carpentry repairs include damaged or loose wood trim, baseboards, crown molding, door and window casing, shelving, built-ins, wainscoting, and selected stair and handrail components. We inspect the existing condition and determine whether repair, reinforcement, or replacement is appropriate.
Can you restore damaged or aging interior woodwork?
Yes. When the existing material is suitable for repair, Done Right Houston can restore damaged woodwork by repairing joints, securing loose sections, replacing deteriorated components, and matching existing trim where practical. The recommended approach depends on the material, damage, and surrounding finish.
Can a handyman handle carpentry repairs?
Yes. A handyman with the appropriate experience can handle many residential finish carpentry jobs, including baseboard repairs, trim installation, small woodwork repairs, shelving, and door casing. Done Right Houston provides these services as part of its residential handyman work.
Do you provide carpentry services in Houston Heights, River Oaks, and nearby neighborhoods?
Done Right Houston provides residential carpentry services throughout its Houston service area, including Houston Heights, River Oaks, Montrose, Spring Branch, Meyerland, Bellaire, and West University Place. Contact us with your location and the work required so we can confirm service availability.
Get a Free Estimate for Carpentry Services in Houston
Tell us what you need done. Trim, baseboards, crown molding, shelving, wainscoting, built-ins, mantels, or any other finish carpentry. We will get back to you within 24 hours with a clear price and available scheduling.
No obligation. No runaround. Just a straight answer and a time that works for you.